AI takeoff for concreters and formworkers
Concrete takeoff software that measures the structural set.
Upload the drawings and EstiMate measures the slabs, footings, reinforcement and excavation for you, in cubic metres, square metres and lineal metres, with each quantity linked to the sheet it came from.
Start free trialFree for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.
Every footing marked on the plan.
This is a commercial footing plan as EstiMate read it. Each footing beam and pad footing is tagged against its mark, and a beam run can be picked out and measured, so you can see where a length or a count came from.

How it works.
Upload the drawings
Structural and architectural PDFs, with the engineer’s notes, specs and schedules. CAD exports and scanned sheets both work.
Get the concrete package
Slabs, footings, reinforcement and excavation come back as line items, each linked to the sheet it was measured on.
Confirm and price
Clear the review list, price it on your own supply and place rates, or export the quantities to Excel and CSV.
Put a live job through it today. Your first week is free.
What gets measured for concrete.
The takeoff comes back the way a concrete package is priced and ordered, in metric units or in imperial on imperial drawings.
Slabs, beams and thickenings
Slab areas are traced from the plan and the volumes are calculated in code from the documented thickness, never estimated by the AI.
Footings and piers
Strip footings by length and volume, pad footings and piers counted from the footing plan and its schedule.
Reinforcement
Slab mesh by area and trench mesh and bar by length, taken from the structural notes and the members they apply to.
Excavation and fill
Excavation and under-slab fill in cubic metres, measured from the site and slab plans.
Formwork and edges
Slab edges and formed faces by lineal metre and area, from the same traced outlines as the concrete.
Membranes and termite protection
Damp-proof membrane by slab area and termite protection by perimeter, so the sundries are not left off the price.
Checked against two full-time estimators.
SA Formwork ran EstiMate against their own manual takeoff on the Marion Basketball Arena. Footings, concrete, reinforcement and excavation were checked line by line, and EstiMate matched 96% of the quantities.
Conflicts flagged, not averaged
When the structural and architectural sheets disagree, you see both figures and the sheet each came from.
Scale from evidence
Scale is taken from evidence on the sheet. When it cannot be confirmed it is marked provisional, so it is the first thing you check.
Where the takeoff still needs you.
Software can measure a drawing set without getting tired. It cannot know what the drawings leave out.
Anything the drawings do not prove
A footing schedule that is missing, or a slab with no thickness noted, is marked TBC and put on your review list instead of being guessed.
Ground and site conditions
Rock, access, pump setups and pour sequence are still your call, as they are with a manual takeoff.
Proven on real jobs.
Builders and trades put EstiMate head to head with the way they already price work. Here is what happened.
90%
less time to quote
20 hoursdown to2 hours
A full carpentry package from a 400-page drawing set, checks included.
93%
less time to price
8 hoursdown to35 min
A commercial steel package, with quantities and weights 99% in line with the owner’s own takeoff.
96%
match with a manual takeoff
Footings, concrete, reinforcement and excavation on a commercial arena, checked line by line against two full-time estimators.
2.7%
from the builder’s own price
EstiMate’s first draft, untouched, landed within 2.7% of the builder’s completed direct-cost estimate.

“We’ve now used it across 6 jobs, it would save us close to 50 hours per job we have used it for.”
Steve & Dallas
Directors, All Trade Constructions
“Estimations have been super accurate and easy to navigate and roll out to our customers.”
Isaac
IB Power Co, Electrical Services
Trusted on real jobs by
EstiMate is trusted on real jobs by North Western Modular, Maxisteel Fabrication, All Trade Constructions, IB Power Co, Zonta Group, Haitch, Pro Plumbing & Excavation, Hotondo Homes.
Over A$200M of projects quoted through EstiMate
Backed byCommon questions
On SA Formwork’s commercial concrete takeoff for the Marion Basketball Arena, EstiMate matched 96% of two full-time estimators’ manual quantities, checked line by line. Each measured quantity links to its sheet and anything unproven is flagged, so you only check what needs checking.
Yes. Concreters and formworkers use it to take off and price their own scope from the builder’s documents, without measuring the rest of the job.
Yes. It is used on commercial and multi-residential structural sets as well as house slabs.
Yes. Every quantity is editable, and your figure is the one carried into the estimate and the export.
Yes. Metric and imperial drawing sets both work, including feet-and-inches dimensions.
Start with a 7-day free trial on a live job. A card is needed to start and nothing is charged during the trial. After that it is $250 a month for Basic or $850 for Pro (AUD plus GST in Australia, USD in the US), billed monthly with no lock-in.
Free for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.





