AI takeoff for steel fabricators and builders

Structural steel takeoff software that reads the whole set.

Upload the structural drawings and EstiMate takes off the beams, columns and members by length, count and weight, with each one linked to the sheet it came from. A steel package priced in minutes, not a day.

Start free trial

Free for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.

Every quantity shown on the drawing.

Members are read from the plans, schedules and notes, and each quantity keeps a link back to its sheet. Anything that does not add up is flagged before you price it.

Residence & Barn
Plans
Ground floor plan marked up by EstiMate: every room outlined and labelled, notes boxed and read
Areas & rooms Notes & titles
Kitchen16.8 m²
Store4.2 m²
Meals18.6 m²
Living23.5 m²
Entry9.6 m²
Pergola24.7 m²
Study11.3 m²
Bed 117.5 m²
External timber to be moisture and termite resistantNote read
Stepdown to concreteNote read
20 items read from this sheet Confirm data

How it works.

PlansTakeoffScopeRatesEstimate
01

Upload the drawings

Structural and architectural PDFs, with member schedules, specs and engineer’s notes. CAD exports and scanned sheets both work.

02

Get the steel package

Beams, columns and members come back as line items by length, count and weight, each linked to its sheet.

03

Confirm and price

Clear the review list, price it on your own supply, fabrication and install rates, or export to Excel and CSV.

Start free trial

Put a live job through it today. Your first week is free.

What gets taken off for steel.

The takeoff comes back the way a steel package is priced, in metric units or in imperial on imperial drawings.

Beams and lintels

Dimensioned member runs are read from the structural plans and totalled by lineal metre.

Columns and posts

Counted from the plans and reconciled with the member schedule where one is drawn.

Members by mark

Each mark on the plan is counted, so repeated members are totalled once and checked against the schedule.

Weight

Steel weight is worked out from the lengths and the sections the drawings specify, ready for supply and fabrication rates.

Checked against the owner’s own takeoff.

Realm Constructions priced the steel package for Coles Hampton in 35 minutes, down from their usual 8 hours. The quantities and weights came back 99% in line with the owner’s own takeoff.

Conflicts flagged, not averaged

When a plan and a schedule disagree on a member, you see both and the sheet each came from.

Your overrides carry through

Change a quantity or a section and your figure is the one used in the estimate and the export.

Where the takeoff still needs you.

Software can read a structural set without getting tired. It cannot know what the drawings leave out.

Anything the drawings do not prove

A member with no section noted, or a schedule that is missing, is marked TBC and put on your review list instead of being guessed.

Connections, access and cranage

Connection design, site access and lifting are still your call, as they are with a manual takeoff.

Proven on real jobs.

Builders and trades put EstiMate head to head with the way they already price work. Here is what happened.

90%

less time to quote

20 hoursdown to2 hours

A full carpentry package from a 400-page drawing set, checks included.

All Trade ConstructionsEast Burwood Pavilion

93%

less time to price

8 hoursdown to35 min

A commercial steel package, with quantities and weights 99% in line with the owner’s own takeoff.

Realm ConstructionsColes Hampton

96%

match with a manual takeoff

Footings, concrete, reinforcement and excavation on a commercial arena, checked line by line against two full-time estimators.

SA FormworkMarion Basketball Arena

2.7%

from the builder’s own price

EstiMate’s first draft, untouched, landed within 2.7% of the builder’s completed direct-cost estimate.

Bay ConstructionsOyster Bay alterations and additions
Steve and Dallas, directors of All Trade Constructions, in their office
“We’ve now used it across 6 jobs, it would save us close to 50 hours per job we have used it for.”

Steve & Dallas

Directors, All Trade Constructions
Isaac from IB Power Co
“Estimations have been super accurate and easy to navigate and roll out to our customers.”

Isaac

IB Power Co, Electrical Services

Trusted on real jobs by

EstiMate is trusted on real jobs by North Western Modular, Maxisteel Fabrication, All Trade Constructions, IB Power Co, Zonta Group, Haitch, Pro Plumbing & Excavation, Hotondo Homes.

Over A$200M of projects quoted through EstiMate

Backed byStartmate

Common questions

On Realm Constructions’ commercial steel package for Coles Hampton, the quantities and weights were 99% in line with the owner’s own takeoff. Each quantity links to its sheet and anything unproven is flagged, so you only check what needs checking.

Realm Constructions priced a commercial steel package in 35 minutes, where the same job usually took them 8 hours.

Yes. Steel fabricators use it to take off and price their own scope from the builder’s documents, without measuring the rest of the job.

Yes. Every quantity is editable, and your figure is the one carried into the estimate and the export.

Yes. Metric and imperial drawing sets both work, including feet-and-inches dimensions.

Start with a 7-day free trial on a live job. A card is needed to start and nothing is charged during the trial. After that it is $250 a month for Basic or $850 for Pro (AUD plus GST in Australia, USD in the US), billed monthly with no lock-in.

Start free trial

Free for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.