AI quantity takeoff for builders, trades and estimators
Construction takeoff software that does the measuring.
Put the scale rule down. Upload your PDF drawings and EstiMate measures every area, length, volume and count by trade, metric or imperial, with each measurement linked to its sheet. Hours of clicking, done for you.
Start free trialFree for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.
A takeoff you can see.
Rooms and outlines are traced right on the drawing and the areas are calculated from that geometry. Notes are read, and anything that does not add up is flagged before you price it.

How it works.
Upload the drawings
Architectural, structural and engineering PDFs, with specs and schedules. CAD exports and scanned sheets both work.
Get the takeoff by trade
Quantities come back by trade, with each measurement linked to the sheet it came from, ready to check.
Confirm and price
Clear the review list, price it on your own rates or export it to Excel and CSV.
Put a live job through it today. Your first week is free.
How your plans are measured.
A quantity takeoff is only worth pricing if you can see where every number came from. As construction plan measurement software, EstiMate measures from the drawings themselves and keeps the evidence attached.
Text, dimensions and scanned sheets
The text layer of a CAD-exported PDF is read directly, and scanned sheets are read with OCR, so dimensions, notes and schedules all count as evidence.
Outlines traced, areas calculated
Rooms and outlines are traced on the sheet and the areas are calculated in code from that geometry, never estimated by the AI.
Scale from evidence
Scale is taken from evidence on the sheet. When it cannot be confirmed it is marked provisional, so it is the first thing you check.
Conflicts flagged, not averaged
When two sheets disagree, you see both figures and the sheet each came from. EstiMate does not quietly split the difference.
Gross and net
Areas are kept gross and net of openings, so cladding, linings and paint are measured on what is actually there.
Your overrides carry through
Change a quantity and your figure is the one used in the estimate and the export.
Material takeoff software, organised by trade.
The takeoff comes back organised the way you price and order, in m³, m², lineal metres and counts, or imperial units on imperial drawings.
Concrete takeoff and earthworks
Excavation volumes, slabs, footings, beams and thickenings in cubic metres, measured from the site and slab plans and the structural drawings.
Carpentry, framing and structure
Framing timber, sheet materials and steel by length, area or count, with timber framing referenced to AS 1684 on residential jobs.
Roofing, cladding and linings
Roof, wall and lining areas in square metres, gross and net of openings.
Openings, fixtures and finishes
Doors, windows, fixtures and fittings counted from the plans and schedules, and trims such as skirting and cornice in lineal metres.
Where the takeoff still needs you.
Software can measure a drawing set without getting tired. It cannot know what the drawings leave out.
Anything the drawings do not prove
An item the documents do not support is marked TBC and put on your review list instead of being guessed.
Scope and site conditions
Access, ground conditions, buildability and anything outside the documents are still your call, as they are with a manual takeoff.
Proven on real jobs.
Builders and trades put EstiMate head to head with the way they already price work. Here is what happened.
90%
less time to quote
20 hoursdown to2 hours
A full carpentry package from a 400-page drawing set, checks included.
93%
less time to price
8 hoursdown to35 min
A commercial steel package, with quantities and weights 99% in line with the owner’s own takeoff.
96%
match with a manual takeoff
Footings, concrete, reinforcement and excavation on a commercial arena, checked line by line against two full-time estimators.
2.7%
from the builder’s own price
EstiMate’s first draft, untouched, landed within 2.7% of the builder’s completed direct-cost estimate.

“We’ve now used it across 6 jobs, it would save us close to 50 hours per job we have used it for.”
Steve & Dallas
Directors, All Trade Constructions
“Estimations have been super accurate and easy to navigate and roll out to our customers.”
Isaac
IB Power Co, Electrical Services
Trusted on real jobs by
EstiMate is trusted on real jobs by North Western Modular, Maxisteel Fabrication, All Trade Constructions, IB Power Co, Zonta Group, Haitch, Pro Plumbing & Excavation, Hotondo Homes.
Over A$200M of projects quoted through EstiMate
Backed byCommon questions
On SA Formwork’s commercial concrete takeoff, EstiMate matched 96% of two full-time estimators’ manual quantities. On Realm Constructions’ steel package it matched 99%. Measured quantities link to their sheet and anything unproven is flagged, so you only check what needs checking.
Yes. Slabs, footings, beams and thickenings are measured in cubic metres from the slab plans and structural drawings, with excavation volumes alongside. SA Formwork, a formwork and concrete contractor, checked EstiMate’s footing, concrete, reinforcement and excavation quantities on a commercial arena against two full-time estimators and they matched to 96%.
Yes. Framing timber, sheet materials and trims come back by length, area or count, with residential timber framing referenced to AS 1684. All Trade Constructions used it as carpentry estimating software on a full carpentry package from a 400-page drawing set and cut the quote from 20 hours to 2.
Yes. Metric and imperial drawing sets both work, including feet-and-inches dimensions.
Yes. Every quantity is editable, and your figure is the one carried into the estimate.
Yes. Concreters, framers, plasterers and steel fabricators use it to take off and price their own scope from the builder’s documents.
Start with a 7-day free trial on a live job. A card is needed to start and nothing is charged during the trial. After that it is $250 a month for Basic or $850 for Pro (AUD plus GST in Australia, USD in the US), billed monthly with no lock-in.
Free for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.





