AI takeoff for carpenters and framers

Framing takeoff software that counts every stud.

Upload the drawings and EstiMate measures the walls, then works out the plates, studs, noggins and sheet materials for you, with each quantity linked to the sheet it came from.

Start free trial

Free for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.

Every quantity shown on the drawing.

Walls and rooms are traced on the plan and the lengths and areas are calculated from that geometry. Notes are read, and anything that does not add up is flagged before you price it.

Residence & Barn
Plans
Ground floor plan marked up by EstiMate: every room outlined and labelled, notes boxed and read
Areas & rooms Notes & titles
Kitchen16.8 m²
Store4.2 m²
Meals18.6 m²
Living23.5 m²
Entry9.6 m²
Pergola24.7 m²
Study11.3 m²
Bed 117.5 m²
External timber to be moisture and termite resistantNote read
Stepdown to concreteNote read
20 items read from this sheet Confirm data

How it works.

PlansTakeoffScopeRatesEstimate
01

Upload the drawings

Architectural and structural PDFs, with specs and schedules. CAD exports and scanned sheets both work.

02

Get the framing package

Plates, studs, noggins, sheet materials and trims come back as line items, each linked to its sheet.

03

Confirm and price

Clear the review list, price it on your own supply and labour rates, or export the quantities to Excel and CSV.

Start free trial

Put a live job through it today. Your first week is free.

What gets measured for framing and carpentry.

The takeoff comes back the way a carpentry package is priced and ordered, in lineal metres, square metres and counts, or imperial units on imperial drawings.

Wall lengths and areas

External walls and internal partitions are traced on the plan and measured by length, with areas calculated from the documented wall height.

Plates, studs and noggins

Worked out in code from the measured wall lengths, so the method is the same on every wall and you can see how each figure was reached.

Referenced to AS 1684

On residential jobs, timber framing is referenced to AS 1684, the residential timber-framed construction standard.

Roof framing

Roof framing is measured by plan area from the roof and floor plans.

Sheet materials and linings

Wall and ceiling areas are kept gross and net of openings, so sheets are ordered on what is actually there.

Fix-out and trims

Skirting, cornice and architraves in lineal metres, and doors and windows counted from the plans and schedules.

A 400-page set quoted in two hours.

All Trade Constructions quoted a full carpentry package for the East Burwood Pavilion from a 400-page drawing set in 2 hours, checks included. The same job usually took them 20.

Conflicts flagged, not averaged

When two sheets disagree, you see both figures and the sheet each came from.

Your overrides carry through

Change a quantity and your figure is the one used in the estimate and the export.

Where the takeoff still needs you.

Software can measure a drawing set without getting tired. It cannot know what the drawings leave out.

Anything the drawings do not prove

A wall height that is not documented, or a missing door schedule, is marked TBC or provisional and put on your review list instead of being guessed.

Engineered members and buildability

Engineer-specified members, tie-down and how you build it on site are still your call, as they are with a manual takeoff.

Proven on real jobs.

Builders and trades put EstiMate head to head with the way they already price work. Here is what happened.

90%

less time to quote

20 hoursdown to2 hours

A full carpentry package from a 400-page drawing set, checks included.

All Trade ConstructionsEast Burwood Pavilion

93%

less time to price

8 hoursdown to35 min

A commercial steel package, with quantities and weights 99% in line with the owner’s own takeoff.

Realm ConstructionsColes Hampton

96%

match with a manual takeoff

Footings, concrete, reinforcement and excavation on a commercial arena, checked line by line against two full-time estimators.

SA FormworkMarion Basketball Arena

2.7%

from the builder’s own price

EstiMate’s first draft, untouched, landed within 2.7% of the builder’s completed direct-cost estimate.

Bay ConstructionsOyster Bay alterations and additions
Steve and Dallas, directors of All Trade Constructions, in their office
“We’ve now used it across 6 jobs, it would save us close to 50 hours per job we have used it for.”

Steve & Dallas

Directors, All Trade Constructions
Isaac from IB Power Co
“Estimations have been super accurate and easy to navigate and roll out to our customers.”

Isaac

IB Power Co, Electrical Services

Trusted on real jobs by

EstiMate is trusted on real jobs by North Western Modular, Maxisteel Fabrication, All Trade Constructions, IB Power Co, Zonta Group, Haitch, Pro Plumbing & Excavation, Hotondo Homes.

Over A$200M of projects quoted through EstiMate

Backed byStartmate

Common questions

All Trade Constructions quoted a full carpentry package from a 400-page drawing set in 2 hours, checks included, where it usually took them 20 hours.

On residential jobs, timber framing is referenced to AS 1684. Members the engineer has specified are taken from the structural drawings.

Yes. Carpenters and framers use it to take off and price their own scope from the builder’s documents, without measuring the rest of the job.

Yes. Every quantity is editable, and your figure is the one carried into the estimate and the export.

Yes. Metric and imperial drawing sets both work, including feet-and-inches dimensions.

Start with a 7-day free trial on a live job. A card is needed to start and nothing is charged during the trial. After that it is $250 a month for Basic or $850 for Pro (AUD plus GST in Australia, USD in the US), billed monthly with no lock-in.

Start free trial

Free for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.