AI takeoff for electricians
Electrical takeoff software that does the counting.
Upload the electrical plan and EstiMate reads the legend, counts every light point, power point and fitting against it, and marks each one on the sheet so you can check the count before you price it.
Start free trialFree for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.
Every point marked on the plan.
This is a new home’s electrical plan as EstiMate read it. Each symbol is circled, numbered and colour-coded by type, so a count of 40 power points is 40 marks you can see, not a number you have to trust.

How it works.
Upload the plans
Electrical and architectural PDFs, with specs and schedules. CAD exports and scanned sheets both work.
Get the points counted
Every symbol is counted against the legend and grouped by type, with each point marked on the sheet it was found on.
Confirm and price
Check the marks, clear the review list, then price it on your own rates or export the quantities to Excel and CSV.
Put a live job through it today. Your first week is free.
What gets counted for electrical.
The takeoff follows the drawing’s own legend, so the counts come back under the names the designer used, grouped the way you price them.
Light points
Downlights, pendants, strip lighting, wall lights and fan-light combos, each counted under its own legend label and totalled as light points.
Power points
Single, double and weatherproof power points counted separately, so each is priced at its own rate.
Switching
Two-way switching is picked up where the plan marks it.
Smoke alarms and exhaust fans
Counted from their symbols, with the legend’s note carried through, such as mains-connected alarms with standby power.
Data, TV and phone points
NBN, TV and phone points counted and grouped together.
The legend, read first
Symbols are matched to the legend on the sheet, so a count is always tied to the item the drawing names.
A count you can check in minutes.
A count is only worth pricing if you can see how it was reached. EstiMate keeps the evidence on the sheet.
Every point marked
Each counted symbol is circled and numbered on the plan, colour-coded by type, so a missed or doubled point stands out.
Provisional until you confirm
Counts come back marked provisional, with the sum shown for each group, so the check is yours to sign off.
Unclear symbols flagged
When a symbol could be either of two legend items, such as a ceiling fan or a fan-light combo, it is listed separately for you to settle, not guessed.
Your own rates
Price against the EstiMate database or your own supply and labour rates, with materials and fit-off kept apart. Change a count and your figure is the one carried through.
Where the takeoff still needs you.
Software can count a drawing set without getting tired. It cannot know what the drawings leave out.
Plans with no electrical layout
When a job has no electrical plan, points are allowed for by floor area, marked provisional and put on your review list, never passed off as counted.
Runs, site conditions and existing wiring
Cable routes, access, the state of existing wiring and switchboard capacity are still your call, as they are with a manual takeoff.
Proven on real jobs.
Builders and trades put EstiMate head to head with the way they already price work. Here is what happened.
90%
less time to quote
20 hoursdown to2 hours
A full carpentry package from a 400-page drawing set, checks included.
93%
less time to price
8 hoursdown to35 min
A commercial steel package, with quantities and weights 99% in line with the owner’s own takeoff.
96%
match with a manual takeoff
Footings, concrete, reinforcement and excavation on a commercial arena, checked line by line against two full-time estimators.
2.7%
from the builder’s own price
EstiMate’s first draft, untouched, landed within 2.7% of the builder’s completed direct-cost estimate.

“We’ve now used it across 6 jobs, it would save us close to 50 hours per job we have used it for.”
Steve & Dallas
Directors, All Trade Constructions
“Estimations have been super accurate and easy to navigate and roll out to our customers.”
Isaac
IB Power Co, Electrical Services
Trusted on real jobs by
EstiMate is trusted on real jobs by North Western Modular, Maxisteel Fabrication, All Trade Constructions, IB Power Co, Zonta Group, Haitch, Pro Plumbing & Excavation, Hotondo Homes.
Over A$200M of projects quoted through EstiMate
Backed byCommon questions
Light points, power points, switching, smoke alarms, exhaust fans, and data, TV and phone points. Each is counted under its legend label and marked on the sheet. On one new home’s plan it counted 49 light points and 40 power points, and all 40 downlights matched a hand count.
Every counted point is circled and numbered on the plan, so you can check it against the drawing in minutes. Counts stay marked provisional until you confirm them.
It is listed separately with both possible legend items named, so you choose the right one on the plan. It is not guessed.
EstiMate allows for points by floor area, marks those lines provisional and puts them on your review list, so you can see which numbers were counted and which were allowed for.
Yes. Price the job against the EstiMate database or your own rates. Every line shows its quantity and the basis it was measured on.
Start with a 7-day free trial on a live job. A card is needed to start and nothing is charged during the trial. After that it is $250 a month for Basic or $850 for Pro (AUD plus GST in Australia, USD in the US), billed monthly with no lock-in.
Free for 7 days on a live job, then from $250 a month (AUD plus GST in Australia, USD in the US). A card is needed to start; cancel before day 7 and you pay nothing.





